Serial Attached SCSI SAS SFF 8087 TO SFF 8482 Cable 28AWG Multi–Port Length 65cm

Serial Attached SCSI SAS SFF 8087 TO SFF 8482 Cable 28AWG Multi–Port Length 65cm​

Detailed Product Description:

65CM 28AWG Internal Mini SAS 36-Pin SFF-8087 Male to SAS 29-Pin Female and 4-Pin Power Cable, Black

Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access

Intended primarily for data storage centers the SAS interface is backwards compatible with SATA

This 1 meter long cable uses 28 AWG wires and is intended for external use

Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backwards compatible with SATA. This allows the user to mix more expensive, lower-capacity SAS drives for applications that require faster data access and higher reliability, with lower-cost, higher-capacity SATA drives for applications with lower access speed requirements. Monoprice carries a full line of quality SAS cables with connectors for every possible application, both internal and external.

This 1 meter long cable uses 28 AWG wires and is intended for internal use. It has a single 36-pin SFF-8087 male Mini-SAS plug on one end and four 29-pin SFF-8482 female SAS plugs, each with an attached 4-pin Molex 8981 female drive power plug, on the other end.

Application:

Mini Serial Attached SCSI (mini SAS) Internal Cable Assemblies provide for high speed transmission up to 6 Gbps. It is an ideal interconnect solution for the growing server and storage market. Mini SAS are designed to significantly reduce the cable size for storage systems currently using SAS 4-lane (4x or 4-lanes of data) and are being widely adopted for next-generation designs.The 36-position internal mini SAS cable assemblies are available in custom lengths of up to one meter. They are also available in three standard sideband configurations. Customized sideband configurations are available upon request.Mini SAS was developed to support data rates at 6.0 Gbps in order to meet the ongoing industry requirement for higher speed and greater bandwidths, This data rate is achieved via the use of high speed differential signals. One assembly is designed to support up to four channels of transmit and receive.

Material:

2:multi-port function added to allow or 4 x 8 x cable is mated 1-by-2 or 1-by-4 integrated connector.

3:ntegrated container design can be integrated into the radiator, allowing hot solutions long-reach, active optical applications.

4:passive - and active-copper cable options available, the ability to extend the reach of copper wire and active.

5:4 x 8 x backshell options and more flexible cable options.

6:Highest-density AOC design, almost double the current density QSFP + AOCs, allows you to choose to use more ports.

7:cable is in line with SAS-3 (12 gbp s) (system and optical-mode capability), InfiniBand * (10 gbp s), Ethernet (10 gbp s) and other agreements. Meet the next generation as well as many existing industry standards.

Company Introduction：

Our company is a connector manufacturer integrating R&D, production and sales. Our main products include high-speed PCIE4.0/5.0 series SATA connectors, USB2.0, USB3.0 series, Micro-B, Micro-B waterproof series, SIM card TF card series, Type-C, Type-C waterproof series, HDMI series, wire-to-board series, SATA series, shortcut terminals, SATA wiring harness, computer peripheral cables, server internal wiring, HDMI and USB3.0, TYPE-C wiring harness, new energy vehicle charging guns, adapters and Cables and so on! Products are widely used in computers, communications, automobiles, medical and electrical equipment.

We have our own independent production plant and independent laboratory; the factory covers an area of 25,000 square meters, the production workshop area is 40,000 square meters, and we have more than 800 employees. It has complete mold development and processing equipment (including Seibu wire cutting, Japanese WAIDA optical grinding, Mitsubishi spark machines, Taiwan high-speed CNC, Yuqing precision grinders, etc.); it has production equipment: 40 high-speed precision punches, 45 imported precision injection molding machines machines, 120 automatic assembly machines and self-developed connector and cable assembly machines. With the strong support of these equipment, the company's monthly production capacity can reach 2 million cables, 30 million connectors, and stamping and injection molding OEM parts processing with an output value of more than 800,000. The current main customers include Foxconn, Dell, Asus, Amphenol, Amphenol FCI, BYD, Tyco, DELL, IBM, MOLEX、LUXSHARE, MGE, Lenovo, WIESON, Chunghsin, Emdoor etc. etc.

Since its establishment, the company has taken “high starting point, high efficiency, high quality, high requirements” as its corporate purpose. All decisions are based on quality and operate in strict accordance with the IS09001 quality control system and ISO14001 environmental certification system. In line with the corporate philosophy of “customer first, honest service, and sustainable operation”, the company relies on excellent quality and strong pre-sales and after-sales services, based on a wide range of domestic and foreign markets, and has established good cooperative relationships with domestic and foreign customers. This enables the company to develop rapidly and steadily.