
WONSUN Vehicle Access DZ-130 barrier gate car parking system with straight arm
Product parameters:
Model: | DZ-130 |
Voltage: | AC 220V/110V±10%, 50/60HZ |
Size: | 1000*352*302mm |
Operation time: | 3s,6s. Customized |
Rated Power: | 100W/120W |
Working Temperature: | -40℃~+75℃ |
Remote Control Distance: | ≥30M |
Spring And Bearing: | Heat Treatment: more durable, more than 5 million times through operation testing |
Material: | Galvanized plate or Cold roll plate, 2.0mm thickness sheet 3 years without rust, shedding and fading |
Packing Size: | 1020*375*467mm , with seven layers carton case inside with air bubble film for protection |
Delivery: | By Sea: big order(more than 100 sets), Cheap, suggested By Air: small order(1-15 sets), quick and cheap, suggested |
Highlights:
Common malfunctions and solutions:
1. Motor works but there is no reacion on the arm;
a. Please check whether the clutch device is locked or not.
2.The boom could not rise up or fall down to the end;
a. When change a long boom to a short one, please readjust it ,
b. The sensor dose not plug well, please check it.
c. The "Speed adjust switch" is wrong adjust, please readjust it.
3. There is no reaction when pressing the remote controller
buttons,
a. Please check whether the power is supplied to the barrier gate
or not,
b. Please check whether the fuse is burnt out or not
c.Please check whether the code both in the remote controller and
the controller board are accordant or not
HOW TO USE?
• Please select the right type of the barrier gates according to the specifications of the place.Fix the barrier gate case board with expansion bolts.
• Fix the boom to the boom tray with the boom press board, then
cover the boom capuche with the screws.
• After that ,fix the cover of the boom to the splint and fasten
them with four screws of 4*16, and slip the cover tap with the
cover by two 3*10 screws.
• Unlock the clutch device with the clutch key clockwise .Move the
boom to the horizontal and vertical manually to make sure there is
no obstruction.Then turn on the power .
Our service:
1.Professional staff answer your questions in English.
2.Customized design and OEM/ODM.
3.Supported by our professional engineers.
4.Special discount of our distributors or agents in their area.
5. Welcome you to visit our factory.
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
![]() |