'02-'09 Audi A8 (D3 Chassis) Air Suspension Shock Absorber Repair Kits Front air spring
Front Air Suspension Repair Fit for Audi A8 D3 4E 2002-2010 Air
Spring Kit for air shock
The front right of the 2002-2010 Audi A8 (D3 Chassis).This new, not
remanufactured, assembly replaces the OE strut and often
problematic adaptive damping and features a new custom-tuned shock
absorber calibrated to provide an excellent ride and outstanding
performance. Each air spring includes a new air bladder protected
by an aluminum can along with a top mount made from
aircraft-quality aluminum.
These new air struts are assembled in China long-lasting seals, new
O-rings, new bump stop, new heavy-duty crimping rings, new air
fitting and connector valve along with a dust boot to protect the
strut.
They are available for the following Audi A8 Quattro years: 2010,
2009, 2008, 2007, 2006, 2005, 2004, 10, 09, 08, 07, 06, 05, 04.
Features:
- Economical Design Replaces the OE Air Spring
- Pre-Assembled for a Fast and Easy Installation
- Resign Upper & Lower Piston
- High quality Air Spring Bladder
- Engineered & Assembled in the China
- One year Warranty
Product: | Air Spring & Air Bag |
OEM No.: | 4E0616039AF 4E0616040AF 4E0616040AA, 4E0616040AJ, 4E0616040AK
E0616039AA, 4E0616039AJ, 4E0616039AK |
Position: | Front Left / Right |
Product Condition: | Brand New |
MOQ: | 1 Pieces |
Sample: | Available |
Advantage | Good quality,Competitive prices |
• Things to know about air spring:
1.Air Spring Installation
1).Before you start installing air springs, make sure you have all
the necessary tools and equipment
to perform the repair safely.
2). Familiarize yourself with the suspension on which you are
performing the repair by reviewing the
manufacturers service guide.
3). If you are in doubt about something, ask for assistance from a
qualified suspension specialist, the
suspension manufacturer or the air spring manufacturer; This can
save you a lot of time and
aggravation later in the job
2.Important tips to remember when installing a new unit
1).Check levelling valve, linkage and transmission parts for wear
and damage and if necessary replace
the damaged parts.
2).Check that the shock absorber for leakages and take a shock
absorber test. A defective shock
absorber must be replaced.
Once the air lines are disconnected, check their entire length for
cracks or other damage. Replace
worn parts.
With the air spring removed, other parts of the air suspension
become more accessible. Check for
wear or damage of the frame hangers, trailing arm bushings, torque
rods, the trailing arms and the
air spring mounts. When it is necessary, also replace parts.
3).Check bearing for air spring bellow for external damage,
deformation, sharp edges and correct
fastening.
4).Before installing the new unit, clean the air spring mounting
plates to ensure proper attachment to
the suspension.
5).Always use new attaching bolts for the installation and observe
the tightening torques. Never use
old bolts, because these can fall out.
6).Check the linkage of the levelling valve to see that it is
functioning properly. Under load, the linkage
should move from the neutral position up to the intake position.
This lets air into the springs,
which brings the arm back to the neutral position.That opens the
exhaust valve, allowing air to
escape until the arm returns to the neutral position. Then check
the driving level.
• About Us:
We offer replacement parts for auto air suspension system such as
air suspension shocks,air springs,
air suspension compressors,air suspension repair kits,control arms
and so on for Mercedes-Benz,
BMW,Audi,Landrover.All parts are 100% compatible with the original
OEM components,and they
are offered with a-12-month warranty.