Fast rapid 30min charging 400km driving car oem ev charger 120kwDc Fast Commercial Ev Charging Station Pile for electric vehicle

1. Technical Parameters

The manufacturer is not liable for damages, losses, costs or expenses incurred

by any user of the EVSE (e.g. the installation engineer or owner of the EVSE) if

such damages, losses, costs or expenses result from a failure to comply with the applicable safety instructions given by the manufacturer, including, but not limited to, the following:

• Power outages or disruptions to the electrical supply to the EVSE.

• Accumulation of dirt or ingress of foreign substances within the EVSE.

• Corrosion of component parts.

• Upgrades enhancements or modifications to the equipment or its use.

• Damage to software or hardware due to any IT security problem, such as but not limited to a virus breakout or malicious hacking of the system.

• Damage or failure of equipment caused by vermin, insect infestations or the like.

• Damage or failure resulting from faults in some other equipment connected to

the scope of work.

• Damage or loss caused by hazards such as fire, flood, storm or the like or

spillage or leakage of chemicals or harmful substances onto the EVSE.

• Fault tracing caused by problems from a source external to the scope of work.

• Unprofessional or incorrect installation, installation not complying to standards, or installation not following the installation instructions contained in the product specific manual.

• Improper operation (in breach of the technical requirements or specifications or manuals of the product), negligence or repairs carried out by the Owner (or any third party not authorized by TCHARGE).

• Non-compliance with the applicable safety regulations or other legal standards by other parties than TCHARGE.

• Insufficient ventilation of the EVSE.

• Operation of the EVSE outside of its design conditions.

• Relocation of the EVSE from the original installation location or alteration of the overall system design.

• Only make changes to the EVSE if the manufacturer approves in writing of the changes.

2.Specification

3. Dimension Diagram

4. installation condition

1.The charger should be installed on a flat concrete foundation, with a cable entrance reserved.

2.The vertical inclination is less than 5%.

3.Fix the bottom of the charger by eight M8 screws embedded in the foundation.

4.Keep at least 100cm spacing around the charger for heat dissipation and operation

5.An Awning is recommended.

5. DC Charging Station Details

5. Projoct Case Show

6. Make sure that the power supply to the EVSE is disconnected.

• Other Task is to be performed by qualified personnel.

• Keep unauthorized personnel at a safe distance during cleaning or maintenance.

• Put on the correct personal protective equipment.

Maintenance schedule for the owner

7.Packing

Introduction 

Tianjin Estel Electronic Science and Technology Co., Ltd (ESTEL(GUANGDONG)TECHNOLOGY CO., LTD), located in China, is a professional supplier of integrated outdoor telecom cabinet and temperature control solutions for outdoor telecom base station. As a science and technology innovative company, we engage in the R&D, manufacture, and sales of telecommunication equipment. Estel has a well-established team of technical and management experts who can meet customers’ specific needs accurately.

The base station integrated solutions and products include outdoor integrated telecom equipment cabinet, battery cabinet, RRU cabinet, power supply cabinet, environment monitoring system, TEC peltier air conditioner, AC220V compressor air conditioner, DC48V variable frequency air conditioner, heat exchanger, rectifier, UPS, embedded telecom power system etc. All the above solutions and products can be custom made.

Our products and solutions have been deployed all over China. Our main domestic customers are China Telecom, China Mobile, China Unicom, State Grid, Shenzhen / Beijing Metro and Huawei / ZTE etc. In addition, our products have been exported to Europe, North America, South America, Central America, Southeast Asia, Africa, Australia, Mid East countries, etc.

“ Customers First, Quality First ” is always our principle. We have attained many certifications, such as ISO9001, ISO14001, OHSAS18001, CE, UL, FCC etc. AS a telecom integrated solutions / energy saving system integrator in China, We have strong advantages in technology competitiveness, management competitiveness ,service competitiveness and price competitiveness. Through many years of experiences in design, production and implementation of different projects around the world, we have gained great reputation. Relying on professional technique and strict quality control, we will continuously offer high cost-effective products and solutions to our respectable customers globally. We will always try our best to meet customers’ need and requirement.

Company Capability

Trade & Market