
CE Certificate Inverter Barrier Flexible Speed Automatic Boom Barrier
Wonsun parking barrier is designed using innovative technology and manufactured with precision
machinery to guaarantee satisfaction in quality and reliability for years to come.
Wonsun parking barrier has been lab tested for more than 5 millions opening / closing and still without any degrade in performance.
Easy to change the speed from 0.9sec to 6sec.
Technical Parameter
Model | WSTP-116 (inverter motor) |
Protection grade | IP45 |
Power | 80w |
Material | Cold roll plate, Galvanized plate or stainless steel |
Running Time | 0.9s to 6s |
Working environments | indoor, outdoor |
Operating Temperature | -45°C to 75°C |
Voltage: | 220V ± 10%, 110V ± 10% |
Relative Humidity | <90% coagulation free |
Motor speed | 30r/min |
Boom length | Max 6 meters |
Net weight: | 50Kg |
Cabinet Color | orange, customized color available |
MCBF | ≥5, 000, 000 times |
Housing Size | 320*280*935mm |
Traffic light | Optional |
Rail material | Aluminum Alloy |
Boom Type | Straight arm: Mar 1- 6 meters optional, size 45×100mm aluminum alloy. Folding arm: 90°folding arm / 180°folding arm, aluminum alloy Fence arm: Two or three fence arm, Mar1- 6 meters, aluminum alloy |
related accessories | infrared sensors, loop detectors,traffic light, UHF readers |
Cabinet | varnish baking, 3 years without fading |
Application | Parking Lots, Toll Gates, Goods Yards, Railway Crossings, Commercial Premises, Aparment Block |
Functions
1)Adjustable speed from 0.9sec to 6sec
2) Manual realease
3) Machine core with compression spring, effectively avoids the accidents caused by spring breaking;
4) Die-casting aluminum alloy motor, precision and good at thermal radiating;
5) Motor cooling fan, solving the problem of heat-protection;
6) Double safety limitswitches (photoelectricity limit switch/motor memory sensor);
7) Reversing on obstacle;
8) Auto-closing;
9) Support the In frared Photocell for anti-bumping function(optional);
10) Support the external and internal Vehicle Loop Detector;
11) Traffic light interface;
12) Wire Control ( switch signal) / remote control (418 HZ/433 HZ );
13) RS485 Communication module (optional).
The parameter for selecting the balance tension spring
Boom Type | The Length of Boom | Selection Spring | |
Boom Type | Spec.(diameter*Length) | ||
Straight Boom/Folding Boom | 6M≥L>5M | Extension Spring | (ø5.5MM*280)+(ø4.5MM*280) |
5M≥L≥4.5M | (ø5.5MM*280) | ||
4.5M>L≥3M | (ø4.5MM*280) | ||
Fence Boom | 5M≥L≥4M | (ø6.5MM*280)+(ø6.5mm*x280) | |
4M>L≥3M | (ø5.5MM*280)+(ø4.5mm*280) |
Common Malfunctions and Solutions
1 The arm is no reaction when connect the power and press the open/close key.
a: Check the controller’s power supply and fuse.
b. There is no battery or power shortage on the remote control, the distance is too far.
c.There is co-frequency interference in the vicinity, check with the wire control interface to see if it’s normal.
d.The external protection circuit has failed or in a protected state,check the infrared device or loop detector device.
e:Check the motor and capacitor to see if invalid.
2 The boom could not raise up or fall down when press the open/close key.
a:The photoelectric limit is on bad contact,check the connections.
b:Replace the photoelectric limit switch.
3 The motor is buzz,boom is no reaction when press the open/close key.
a:The voltage is insufficient,check the 220V power supply.
b:The gears are stuck, and hand wheel rotates several circles toward the loose place, and re-adjust the photoelectric limit to prevent the struck caused by mechanical limit from being before the photoelectric limit.
c:It’s imbalance between the balance spring and boom,re-adjust it.
4 The boom is not horizontal and vertical.
a:The photoelectric limit is shaft,re-adjust and fix.
b:Check the connection rod and adjust the boom to horizontal and vertical,and make the photoelectric limit acts before the mechanical limit.
5 The force for arm up become smaller,sometimes need the handle assistance to make it up.
a:Check the motor and capacitor.
b:Re-adjust the spring balance.
FAQ
1. Are you manufacturer or trade company?
We're professional manufacturer who has our own factory in Shenzhen Pingshan since 2007.
2. What is your MOQ?
As for usual order, there is no MOQ; For OEM order, at least 30 sets.
3. What is your delivery time?
As for usual order, it is 3-5 days after received your payment with 50 sets order quantity.
For OEM order, it is 7-15 days after receieved your payment with 30 sets order quantity.
4. What is the terms of payment?
30%-40% advance deposite, 60%-70% balance before shipment for large quantity.
Contact us for price list and catalog:
Sue Zhang
Skype:SueZhang729
Whatsapp:+86 158 7925 9831
Email:sue@wonsunbarrier.com
RS485 Inverter Motor Automatc Barrier Gate With Bi-direction Main
Shaftg Vehicle Barrier Gate
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
![]() |