CE Certificated Entrance Barrier Gate LED Arm 6M Boom Length 0.9s-6s Speed

CE Certificate 6M Classic Intelligent Barrier Gate Boom LED Arm

Intelligent Barrier Quick Details:

Intelligent Barrier Model: WSTP-115 (inverter motor)

Intelligent Barrier Protection grade: IP45

Intelligent Barrier Power:80W

Intelligent Barrier Material: Cold roll plate, Galvanized plate, or stainless steel

Intelligent Barrier Running Time:0.9s to 6s

Intelligent Barrier Operating Temperature:-45°C to 75°C

Intelligent Barrier Voltage:220V ± 10%, 110V ± 10%

Intelligent Barrier Functions

1) Adjustable speed from 0.9sec to 6sec

2) Intelligent Barrier Manual release

3) Machine core with compression spring, effectively avoids the accidents caused by spring breaking;

4) Die-casting aluminum alloy motor, precision and good at thermal radiating;

5) Intelligent Barrier Motor cooling fan, solving the problem of heat protection;

6) Double safety limit switches (photo electricity limit switch/motor memory sensor);

7) Reversing on obstacle;

8) Auto-closing;

9) Support the framed Photocell for anti-bumping function(optional);

10) Support the external and internal Vehicle Loop Detector;

11) Traffic light interface;

12) Wire Control ( switch signal) / remote control (418 HZ/433 HZ );

13) RS485 Communication module (optional).

Intelligent Barrier Technical Data:

Common Malfunctions and Solutions

1 The Intelligent Barrier arm does not react when connecting the power and pressing the open/close key.

a: Check the controller’s power supply and fuse.

b. There is no battery or power shortage on the remote control, the distance is too far.

c.There is co-frequency interference in the vicinity, check with the wire control interface to see if it’s normal.

d. The external protection circuit has failed or is in a protected state, check the infrared device or loop detector device.

e: Check the motor and capacitor to see if invalid.

2 The Intelligent Barrier boom could not rise or fall when pressing the open/close key.

a: The photoelectric limit is on bad contact, check the connections.

b: Replace the photoelectric limit switch.

3 The Intelligent Barrier motor is buzzing, and boom is no reaction when pressing the open/close key.

a: The Intelligent Barrier voltage is insufficient, check the 220V power supply.

b: The gears are stuck, and the hand wheel rotates several circles toward the loose place, re-adjust the photoelectric limit to prevent the strike caused by the mechanical limit from being before the photoelectric limit.

c: It’s an imbalance between the balance spring and boom,re-adjust it.

4 The Intelligent Barrier boom is not horizontal and vertical.

a: The photoelectric limit is shaft,re-adjust, and fix.

b: Check the connection rod adjust the boom to horizontal and vertical, and make the photoelectric limit acts before the mechanical limit.

5 The force for the arm up becomes smaller, sometimes needing the handle assistance to make it up.

a: Check the motor and capacitor.

b: Re-adjust the spring balance.

Intelligent Barrier Service Items

9.1 One year’s free servicing is supplied(not including the arm);

9.2 Lifetime charged servicing is offered;

9.3 Technology servicing is supplied.

The following situations are charged for servicing(or changing):

1) Broken by the wrong installation.

2) Broken by improper voltage.

3) The surfaces of the system are destroyed by wrong installation or use.

4) Broken by natural disasters.

5) Overdue.

6) Servicing items out of our promises.

RS485 Inverter Motor Automatic Barrier Gate With Bi-direction Main Shaftg Vehicle Barrier Gate