China Categories
All Categories
Inverter Motor Toll Barrier Gate 1s Second AC220V CE Certificated For Highway Road
Ask Latest Price
Brand Name:WONSUN
Model Number:DZ-140
Certification:CE, ISO, SGS
Price:USD300~350per unit
Payment Terms:T/T,Western Union,Money Gram, Trade Assurance,Paypal etc.,
Supply Ability:1000 Sets/Month
Delivery Time:3-7 working days after received your payment
Company Data
Verified Supplier
Contact Person
Keira
Business Type:
Manufacturer Exporter Seller
Officials:
1st Floor, Zhigu, No. 2-10, South jinlong Avenue, Shahu Community, Biling Street, Pingshan District, Shenzhen, China
Quality:
Quality Certifitation Available
Visit Website
Product Details
Company Profile
Product Details
Inverter Motor Toll Barrier Gate 1s CE Certificate For Highway Road
Advantages:
1.The arm direction can be quickly interchanged
2.Open the barrier gate by motor wheel when power off and automatic locking when power on.
3.Balance boom running with a motor transmission of cranks and shafts.
4.Remote control to operate the barrier gate.
5.Auto-reverse when the boom meets obstruction.
6.Infrared photocells connector is available.
7.Loop detector connector is available.
8.Well-intergrated with car parking system equipment,with wire control(must be switch signal).
9.Connector for traffic light(AC220V,power less than 40W)
10.Offering dry contact signal for car parking system(COM,NC,NO)
11.Auto-delay when closing(adjustable)
Technical Data:
1 Working temperature(motor): -35℃~+85℃
2 Working temperature(control panel): -35℃~+85℃
3 Voltage:220V±10%,50HZ or 110V±10%,60HZ
4 Rated Power:80W,capacitor:9+uF/450W
5 Humidity:≤90%RH
6 Distance of remote control:100M＞L≥30M in the open place
Selection of spring.
| Spring type | Diameter | Spring Length |
| Small size | 4.5MM | 280MM |
| Medium size | 5.5MM | 280MM |
| Big size | 6.5MM | 280MM |
Maintenance
1)Keep the barrier gate clean.
2)Check the joints every month in case of any loose parts.
3)Check the spring elasticity after barrier gate running 30,000times
4)Check the easily worn-out parts(like spring,limit switch)every half year and renew it.
5)Remote control distance will be shortened or not work in cases like big object screening, battery run out.extreme weathers.
FAQ:
1. When barrier finish closing, why does the arm open itself slowly?
1. When barrier finish closing, why does the arm open itself slowly?
- the spring is too tight, you need release the spring a little, then test it again.
- see whether the main crank touch the triangle tightly or not, if tightly, adjust it.
- reset the balance position and the electrical limit switch.
2. Why does the controller panel operate with "Di Di Di" abnormal noises?
- As for this, it means the resistance on controller board is broken, if you have professional tools to check,
- then replace that broken resistance, if not, replace that controller panel.
3. Why does the barrier finish half operation of opening and closing?
- If uses our controller panel, you only need to find resistance R37 on controller panel, and repalce it is ok.
4. When barrier closed, why is there a 5 degree angle of inclination?
- the model is not good, and the gear doesn't fit each other tightly.
- the barrier didn't adjust well, need to reset.
5. When barrier finish open, but it closes itself without any order
control, what's the problem?
- To check the loop cable first, because the loop cable maybe brokem
- To check the motor sensor, if it is not set well, then reset it in the middle between two holes on sensor rod.
6. Why does the arm wave a lot when opening and closing?
- The spring is very tight
- The Screw touches the rubber absorption tightly, need to reset again.
7. Rubber linning installation suggestion:
- It is good use for fast speed, like 0.6s, 1s, 1.8s and 3s.
- The place with many vehicles come and go, like shopping center, carpark area.
8. Can you accept OEM/ODM order?
- Absolutely, we are manufacturer of barrier gate, with 7 years researching and developing experience.
Contact us for pricelist and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype:SueZhang729
Whatsapp:+86 158 7925 9831
Company Profile
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd was
founded in 2011, which is a professional manufacture for
high-end barrier gate and sliding gate
motor, included the product design and development,
production, sales and service. We are committed to provide more
stable, more practical and environmentally parking barrier for the
majority of the access control system customers.
At present, there are mainly five series of barrier gate for
option: high speed servo motor barrier gate; Fast-speed Dc brushless motor
barrier gate; Classic AC motor barrier gate; Commercial DC motor
advertising barrier gate and NON-spring DC motor barrier.Our products are exported to more than 100 countries, and enjoy
high reputation in the world.
We warmly welcome customers to visit and cooperate with us,
and create brilliant future together. Our gathering is because of
the common ideals and dreams, that is, made in China, loved by the
world!
 |
Send your message to this supplier
You May Like
Automatic Parking Toll Barrier Gate 150W DC Brushless Motor IP44
Round Arm Toll Barrier Gate , 0.9 Sec 4 Meters Electric Barrier Gate System
24V Motor Speed Adjustable Toll Barrier Gate With Backup Battery
Explosion Proof 3mm Thickness Barrier Gate Automatic Identification For Chemical Factory Gas Station
Fast Speed Heavy Duty 6m 24Hrs Automatic Toll Gate
220 / 110v Remote Vehicle Loop Detector Toll Barrier Gate With AC Motor
Durable High Speed Toll Barrier Gate Auto Reverse Car Park Boom Gates
DC Brushless Motor Toll Barrier Gate
100M Remote Control 140W 1850rpm 1.5sec Toll Barrier Gate
0.6S DC 24V Servo Motor Toll Barrier Gate For Highway Toll Station
IP54 Electric Boom Barrier Toll Barrier Gate With Aluminum Alloy Straight Arm
Inquiry Cart
0