Blue And White Security Boom Parking Barrier Gate Folding Arm 90 Degree Design Rated Speed

Parking Barrier Gate Folding Arm 90 Degree DC Brushless Motor

Parking Barrier Gate Quick Details:

This product adopts the latest mold design technology, mold die-casting manufacturing technology, and brushless control speed technology, and can be quickly interchanged, with no clutch design, more reliable quality, and more convenient use. The movement adopts a two-stage worm gear transmission and curved crank arm three-link structure, and the landing rod is fast and stable. Easy maintenance and long service life.

Parking Barrier Gate Technical parameters

Parking Barrier Gate Rated current:8.58A
Parking Barrier Gate Rated power:140W
Parking Barrier Gate No-load speed:1850rpm
Parking Barrier Gate Rated speed:1400rpm
Parking Barrier Gate Output Power:56.8N.m
Parking Barrier Gate Relative humidity:≤90%
Parking Barrier Gate IP Degree: IP44
Parking Barrier Gate Max length of arm:6M

Parking Barrier Gate Features

1 Open the Parking Barrier Gate by the motor wheel when power is off, automatically reset it after power on
2 Curved crank Parking Barrier Gate arm three-link movement structure, the operation is stable
3 Wireless remote control control open/close
4 Infrared photocells connector is available
5 Loop detector connector is available.
6 Well-integrated with car parking system equipment, with wire control(must be switch signal)
7 Offering dry contact signal for car parking system(COM, NC, NO)
8 RS485 or CAN network communication interface(no need to install module)
9 Counting interface
10 24V backup battery interface(Can be charged by using solar energy)

The parameter for selecting the balance tension spring

Parking Barrier Gate Product Maintenance

1 Keep the Parking Barrier Gate clean

2 Check the joints every month in case of any loose parts.

3 Check the spring elasticity after the barrier gate runs 3000 times.

4 Check the easily worn-out parts(like the spring, and limit switch), every half year and renew them.

5 Remote control distance will be shortened or not work in cases like big object screening, battery exhaustion, and extreme weather.

Electrical installation, wiring diagram

1 All the electrical connections are done before delivery and please do not change it randomly. The necessity is to connect the AC220V power and grounding connection.

2 Traffic light connector: it can connect power no more than 40W.

3 Infrared photocells an-hit connector: connect the switch signal for receiver output.

4 Loop detector connectors: it supports both external and internal loop detectors (only one way can be chosen).

If an external type is selected, just connect the switch signal to the loop detector output.

If the internal type is selected, needs to connect the wire signal to the vehicle detector wire interface.

5 Parking Barrier Gate Car parking system connectors: connect the system switch signal to this connector, and then it can control the barrier gate operation.

6 Limit switch signal of up/down: with output COM, NO, NC, it monitors the status of the barrier gate.

7 RS485 connector: after choosing the option RS485 module, it can manage MAX 15 pieces of barrier gates by PC software.

Contact us for pricelist and catalog:

Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831