SATA 7p Male DIP 180° Au 30u'' Plated Wire to Board Connector

I. Basic overview
Type: SATA 7P Male DIP 180° Au 30u "Plated Wire to Board Connector, a 7-pin, male, DIP (double in-line) package, 180 degree bending Angle, and 30 microinches of gold plating thickness.
Application: Widely used in computers, servers, data storage devices and other fields, as a SATA hard disk, optical drive and other storage devices and the key connection components between the motherboard.

II. product characteristics
1. High-performance gold-plated pin:
The pin surface is gold-plated with 30 microinches, which not only improves the corrosion resistance and wear resistance of the pin, but also ensures good conductance Electrical performance and signal transmission quality.
2.DIP in-line package:
The DIP package allows the connector to be plugged directly into the socket on the board, simplifying the installation process and improving the connection Stability and reliability.
3.180 degree bending Angle:
The unique 180-degree bending design allows the connector to be flexibly installed in a space-limited environment to meet the needs of different application scenarios.
4. High-speed transmission:
It supports high-speed data transmission characteristics of SATA interface, which can meet the requirements of modern storage devices for data transmission speed.
5. Hot Swap support:
Allows storage devices to be connected or disconnected while the system is running, improving the flexibility and efficiency of data transfer.
6. Stable and reliable:
The use of high-quality materials and advanced production processes to ensure the connector's stable performance and reliability in a variety of environments.

III. Technical specifications
Pin count: 7 pins
Interface type: SATA
Package form: DIP in line
Bending Angle: 180°
Gold plating thickness: 30u "(micro inch)
Electrical performance:
Rated current: depends on the specific product
Contact resistance: Low value to ensure signal transmission quality
Insulation resistance: High value to ensure electrical isolation
Physical size: including the connector height, width, pin spacing, etc., the specific value needs to refer to the product specification.

IV. Application scenarios
It is mainly used when the mainboard of a computer or server needs to be connected to a SATA storage device.

V. Precautions
During use, ensure that the connector is correctly connected to the device to avoid signal transmission problems caused by poor contact.
Pay attention to the use of the connector environment, avoid the use of humid, high temperature or strong electromagnetic interference environment, to ensure the stability and reliability of data transmission.
During the welding process, follow the relevant welding process requirements to ensure the welding quality and avoid damage to the connector.

Company Introduction：

Our company is a connector manufacturer integrating R&D, production and sales. Our main products include high-speed PCIE4.0/5.0 series SATA connectors, USB2.0, USB3.0 series, Micro-B, Micro-B waterproof series, SIM card TF card series, Type-C, Type-C waterproof series, HDMI series, wire-to-board series, SATA series, shortcut terminals, SATA wiring harness, computer peripheral cables, server internal wiring, HDMI and USB3.0, TYPE-C wiring harness, new energy vehicle charging guns, adapters and Cables and so on! Products are widely used in computers, communications, automobiles, medical and electrical equipment.

We have our own independent production plant and independent laboratory; the factory covers an area of 25,000 square meters, the production workshop area is 40,000 square meters, and we have more than 800 employees. It has complete mold development and processing equipment (including Seibu wire cutting, Japanese WAIDA optical grinding, Mitsubishi spark machines, Taiwan high-speed CNC, Yuqing precision grinders, etc.); it has production equipment: 40 high-speed precision punches, 45 imported precision injection molding machines machines, 120 automatic assembly machines and self-developed connector and cable assembly machines. With the strong support of these equipment, the company's monthly production capacity can reach 2 million cables, 30 million connectors, and stamping and injection molding OEM parts processing with an output value of more than 800,000. The current main customers include Foxconn, Dell, Asus, Amphenol, Amphenol FCI, BYD, Tyco, DELL, IBM, MOLEX、LUXSHARE, MGE, Lenovo, WIESON, Chunghsin, Emdoor etc. etc.

Since its establishment, the company has taken “high starting point, high efficiency, high quality, high requirements” as its corporate purpose. All decisions are based on quality and operate in strict accordance with the IS09001 quality control system and ISO14001 environmental certification system. In line with the corporate philosophy of “customer first, honest service, and sustainable operation”, the company relies on excellent quality and strong pre-sales and after-sales services, based on a wide range of domestic and foreign markets, and has established good cooperative relationships with domestic and foreign customers. This enables the company to develop rapidly and steadily.