
Electrical Road Safety Intelligent Barrier With 2mm Cold Rolled Steel Plate
Wonsun intelligent barrier gate is designed using innovative technology and manufactured with precision
machinery to guarantee satisfaction in quality and reliability for years to come.
Wonsun intelligent barrier gate has been lab tested for more than 5 million opening/closing and still without any degradation in performance.
No limit switch design minimizes mechanical wear and enhances barrier lifetime.
Model Selection and Differences
Intelligent Barrier Specifications
Model | WST1211 |
Working Temperature | -40℃~+75℃ |
Voltage | 220V±10%, 110V±10%, 50/60HZ |
Rated power | 80W |
Relative humidity | ≤90% |
Remote control distance | ≥30m |
Net weight | 48kgs |
Speed | 1S,1.8S,3S, 6S |
Max boom length | 6 meters |
Motor Rotational speed | 1400rmp |
Protection Degree | IP44 |
Communication with customers
1) Q: Connected power and pressed the open/close button but the
traffic barrier gate no action.
A | Reason | Solution |
1 | Fuse blown | Check the fuse and power in the controller |
2 | The battery of the remote control powered off | Change a new one |
3 | External protection circuit break or at protecting status | Open the barrier door and click the OPEN/CLOSE button on the control box |
4 | Same frequency interference | Check photocell and loop detector |
2) Q: Connected power and press the open/close button, the traffic
barrier gate will move but even when it is in the right position,
the motor still runs and does not stop.
A | Reason | Solution |
1 | Limit switch | Adjust the horizontal/vertical limit switch to the correct position |
2 | Main controller failure | Change a new one |
3) Q: The intelligent barrier motor running but the traffic barrier
gate arm is not in action?
A | Reason | Solution |
1 | Intelligent Barrier arm at 45° position where is hard to move | Unlock the clutch and manually rotate the arm to a horizontal or vertical position then try again |
2 | The tension of the balancing spring is not suitable | Adjust spring exactly |
3 | Low working voltage | Check the voltage and power |
4) Q: When opening/closing, traffic barrier gate arm cannot reach
the right position (90° vertical & 180° horizontal)?
A. | Reason | Solution |
1 | Length adjustment of connecting rod not correct | Open the barrier door and unlock the clutch to check when the arm is at 90° vertical position if the master rod covers slave one; when the arm is at 180° horizontal position if the master rod and slave one are in the same straight line |
2 | Nuts on the limit switch loose | Tighten the nuts when arm at 90° vertical and 180° horizontal |
Market | Revenue(Previous Year) | Total Revenue (%) |
North America | USD 63,608 | 1 |
South America | USD 508,869 | 8 |
Eastern Europe | USD 3,180,436 | 50 |
Southeast Asia | USD 318,043 | 5 |
Oceania | USD 127,217 | 2 |
Mid East | USD 190,826 | 3 |
Western Europe | USD 1,017,739 | 16 |
Domestic Market | USD 954,130 | 15 |
packing & delievery
1. Strong carton case with cushion for safety, air bubble film inside for protecting the appearance from damaging.
2. As for wooden crate packing, it is USD$ 10/ps; for wooden case packing, it is USD$ 32/ps.
3. As for shipping, we can send you the goods by air, sea, and express, which is according to your detailed requirements.
Contact us for the price list and catalog:
Sue Zhang
Email:sue@wonsunbarrier.com
Skype: SueZhang729
Whatsapp:+86 158 7925 9831
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
![]() |