Computer Serial Attached SCSI SAS Cable SFF 8087 To SFF 8087 Tinned Cooper Conductor

Computer Serial Attached SCSI SAS Cable SFF 8087 To SFF 8087 Tinned Cooper Conductor​

Mini Serial Attached SCSI (mini SAS) Internal Cable Assemblies provide for high speed transmission up to 6 Gbps. It is an ideal interconnect solution for the growing server and storage market. Mini SAS are designed to significantly reduce the cable size for storage systems currently using SAS 4-lane (4x or 4-lanes of data) and are being widely adopted for next-generation designs.The 36-position internal mini SAS cable assemblies are available in custom lengths of up to one meter. They are also available in three standard sideband configurations. Customized sideband configurations are available upon request.Mini SAS was developed to support data rates at 6.0 Gbps in order to meet the ongoing industry requirement for higher speed and greater bandwidths, This data rate is achieved via the use of high speed differential signals. One assembly is designed to support up to four channels of transmit and receive.

Mini SAS HD Introduction:

March 2012 began a new Mini SAS HD R & D, and dual-port density and low-key as a PCIe card support 6 and 12Gbps SAS applications. The new products, including a connector / card structure and direct-attach copper cables with SAS 2.1 standard and supports the latest SAS protocol for high-speed data transmission in a storage area network (san), data center, switching applications procedures. Mini SAS HD interconnect is fully compatible with 2.1 and SFF SAS - 8644 industry standards.

Mini SAS HD Cable Introduction:

Mini SAS HD direct-attach cables, can provide 4 x (4 channels) or 8 x (8 Channel) cable plug configurations have been developed for the easy wire routing. Wire design combines brand cable outlet 4 pairs double TurboTwin telegraph cable connector backshells, for greater flexibility and tighter bend radius, the wire can be 4 pair cable. The two most shielded wire package aluminum foil and copper braid letter maximize signal integrity and reduce EMI radiation.

In addition, each Mini SAS HD cable incorporates an industry-compliant eepm signature, allows the host to recognize the cable and auto-configuration system settings to optimize the transmission of data signals. One of the key mechanical properties Mini SAS HD connector cable plug is an enhanced pull-to-release hooks, spring hooks at La reduces the insertion force to increase their retention force on the plug with safety and stability. Mini SAS HD cable must have three sizes (26, 28 and 30 AWG) and a length from 0.5 to 7M.

Mini SAS to mini sas cable

Product Description:

30AWG Internal Mini SAS 36pin (SFF-8087) Male to Mini SAS 36pin (SFF-8087) Male Forward Breakout Cable - Black

Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access. Intended primarily for data storage centers, the SAS interface is backwards compatible with SATA. This allows the user to mix more expensive, lower-capacity SAS drives for applications that require faster data access and higher reliability, with lower-cost, higher-capacity SATA drives for applications with lower access speed requirements. Vision carries a full line of quality SAS cables with connectors for every possible application, both internal and external.

This 1/2 meter long cable uses 30 AWG wires and is intended for internal use. It has a one 36-pin SFF-8087 male Mini-SAS plug with locking latch on one end and has one 36-pin SFF-8087 male plugs on the other, allowing you to connect four SATA drives to an SAS controller. This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA end.

Specifications:

Company Introduction：

Our company is a connector manufacturer integrating R&D, production and sales. Our main products include high-speed PCIE4.0/5.0 series SATA connectors, USB2.0, USB3.0 series, Micro-B, Micro-B waterproof series, SIM card TF card series, Type-C, Type-C waterproof series, HDMI series, wire-to-board series, SATA series, shortcut terminals, SATA wiring harness, computer peripheral cables, server internal wiring, HDMI and USB3.0, TYPE-C wiring harness, new energy vehicle charging guns, adapters and Cables and so on! Products are widely used in computers, communications, automobiles, medical and electrical equipment.

We have our own independent production plant and independent laboratory; the factory covers an area of 25,000 square meters, the production workshop area is 40,000 square meters, and we have more than 800 employees. It has complete mold development and processing equipment (including Seibu wire cutting, Japanese WAIDA optical grinding, Mitsubishi spark machines, Taiwan high-speed CNC, Yuqing precision grinders, etc.); it has production equipment: 40 high-speed precision punches, 45 imported precision injection molding machines machines, 120 automatic assembly machines and self-developed connector and cable assembly machines. With the strong support of these equipment, the company's monthly production capacity can reach 2 million cables, 30 million connectors, and stamping and injection molding OEM parts processing with an output value of more than 800,000. The current main customers include Foxconn, Dell, Asus, Amphenol, Amphenol FCI, BYD, Tyco, DELL, IBM, MOLEX、LUXSHARE, MGE, Lenovo, WIESON, Chunghsin, Emdoor etc. etc.

Since its establishment, the company has taken “high starting point, high efficiency, high quality, high requirements” as its corporate purpose. All decisions are based on quality and operate in strict accordance with the IS09001 quality control system and ISO14001 environmental certification system. In line with the corporate philosophy of “customer first, honest service, and sustainable operation”, the company relies on excellent quality and strong pre-sales and after-sales services, based on a wide range of domestic and foreign markets, and has established good cooperative relationships with domestic and foreign customers. This enables the company to develop rapidly and steadily.